synchroscope sentence in Hindi
"synchroscope" meaning in Hindi synchroscope in a sentenceExamples
- For most systems, synchroscopes are connected through voltage transformers to reduce the machine voltage to around 120 volts to operate the instruments.
- Since most synchroscopes are connected only to a single phase of the two systems, they cannot assure that the phase sequence is correct.
- As the frequency of the generator nears that of the grid, the synchroscope needle slows down and when the frequencies match, the needle stops rotating.
- In a Weston pattern synchroscope, the moving element is not free to rotate continuously and oscillates back and forth slowly as the two sources are brought into synchronism.
- In some power plants, a set of lamps may be connected between the generator and system busses ( or between the instrument transformers connected to those busses ) as a backup to the synchroscope instrument.
- As a pilot aid to manually synchronizing the propellers, some twins have a small gauge called a synchroscope mounted in or by the tachometer ( s ) with a propeller symbol on a disk that spins.
- There may also be controls for the supply of electricity to the switchboard, coming from a generator or bank of electrical generators, especially frequency control of AC power and load sharing controls, plus gauges showing frequency and perhaps a synchroscope.
- Depending on the application and the circuit design, the breaker is closed when the synchroscope is pointing at approximately 5 minutes to noon, while traveling slowly in the fast direction, to allow the incoming generator to come onto the grid as a source.
- If the generator is turning at a lower frequency than the grid, the synchroscope needle rotates continually in the direction ( usually counterclockwise ) marked " slow " or " lag " on the dial to indicate that the generator is running slower than, or lagging behind, the grid.
- The angle between the systems is zero when the synchroscope needle is pointing directly to the line in between the " slow " and " fast " markings on the dial . ( In the picture example in this article, the zero-phase-angle position is straight upwards, at the twelve o'clock position .)