rectangular waveguide in a sentence

Examples

1. For rectangular waveguide cavity, field distribution of dominant TE _ { 10n } mode is well known.
2. The scanner itself consists of a section of rectangular waveguide formed into a hollow cone, like an ice cream cone.
3. The most common modes used are the dominant modes : TE 101 in rectangular waveguide, and TE 111 in circular waveguide.
4. For the particular case of "'rectangular waveguide "', it is possible to base an exact analysis on this view.
5. In this case, however, this relation cannot be expressed explicitly, as it is verified in the most elementary case of the rectangular waveguide, but it is implicitly given by a transcendental equation.
6. The field distribution in a rectangular waveguide cannot be solved analytically, however approximate solution methods, such as Marcatili's method, Extended Marcatili's method and Kumar's method, are known.
7. where p is the distance between the posts in the post wall, r describes the radius, and a _ { RWG } as well as a _ { SIW } are the widths of the rectangular waveguide and SIW respectively.
8. The range over which the dominant mode is guaranteed to be spurious-mode free is less than that in rectangular waveguide; the ratio of highest to lowest frequency is approximately 1.3 in circular waveguide, compared to 2.0 in rectangular guide.
9. While there are in theory no physical limits on the frequency of which load-pull can be performed, most load-pull systems are based on passive distributed networks using either the slab transmission line in its TEM mode or the rectangular waveguide in its TE01 mode.
10. In rectangular waveguides, rectangular mode numbers are designated by two suffix numbers attached to the mode type, such as TE " mn " or TM " mn ", where " m " is the number of half-wave patterns across the width of the waveguide and " n " is the number of half-wave patterns across the height of the waveguide.