nichrome in a sentence

Examples

1. CalRods ? " Manufacturing them ( whilst securely, repeatably ) maintaining the electrical resistance seems like a pretty good trick, especially if the nichrome element has to have a high-ish resistance.
2. Nichrome wire can be used as an alternative to platinum wire for flame testing by colouring the non-luminous part of a flame to detect cations such as sodium, potassium, copper, calcium etc.
3. Fuse elements may be supported by steel or nichrome wires, so that no strain is placed on the element, but a spring may be included to increase the speed of parting of the element fragments.
4. So suppose you have a 9V battery, ignoring its equivalent series resistance, and using a piece of copper wire you connect the battery to a heating element like nichrome wire which has a 10ohm resistance.
5. Potential from an alternating current source, which can either be 2 phase or 3 phase, flows through the coiled Nichrome wire, heating up the wire, which in turn, heats the cartridge heater sheath.
6. By the 2010s, FilmTack began to focus on launching dual-ply or 3-ply Nichrome ( an alloy of nickel and chromium ) window films to achieve better pareto efficiency between cost and heat reduction.
7. Maybe the MgO binder is sintered into a sort of a solid around the nichrome so that the assembly holds together better during " packing " into the final container tube .'Guess I'll have to Google around . ..
8. The one change I suppose I'd make if I were the Chief Regulator would be to require a Steve Summit observed, that electrical insulation makes the Calrod heaters much slower to begin working than the bare nichrome wires in a toaster.
9. The most common type of metal alloy used for this purpose is a Nickel-Chromium mixture, also known as Nichrome . the Nichrome wire is wound around a ceramic core, and the number of spirals per inch vary according to the requested watt density.
10. The most common type of metal alloy used for this purpose is a Nickel-Chromium mixture, also known as Nichrome . the Nichrome wire is wound around a ceramic core, and the number of spirals per inch vary according to the requested watt density.