collector current in a sentence
Examples
- Q1's collector current will be essentially zero, so R2 will pull the output voltage Q high ( logic 1; near V + ).
- Except at low collector-emitter voltages, the secondary breakdown limit restricts the collector current more than the steady-state power dissipation of the device.
- A saturated transistor is turned on hard, which means it has a lot more base drive than it needs for the collector current it is drawing.
- For positive voltages, the collector current through resistor 32 is less than the emitter current, so the base current is high to make up the difference.
- At low supply voltages ( typically 0.75 V and below ) the transistor requires a larger base current to maintain saturation as the collector current increases.
- In what follows, the output variable is selected as the short-circuit current of the amplifier, that is, the collector current of the output transistor.
- In a grounded-emitter transistor circuit, such as the light-switch circuit shown, as the base voltage rises, the emitter and collector currents rise exponentially.
- The turned on transistor's collector current will then pull the output Q low ( logic 0; V CE ( sat ) usually less than 1 volt ).
- Because Q 1 and Q 2 are matched, their ? 0-values also agree, making the mirror output current the same as the collector current of Q 1.
- All increases in voltage and current stop when the sum of the collector current of Q1 and base current of Q3 exactly balance \ scriptstyle i _ \ text { in }.