bit error rate in a sentence

Examples

1. There are a number of protocols that are capable of meeting real-time requirements for reliable delivery and timeliness, at least for firm real-time systems ( due to the inevitable and unavoidable losses from, e . g ., the physical layer bit error rates ):
2. The CRC-4 method is mainly used to protect the communication against a wrong frame alignment word, and also to provide a certain degree of monitoring of the bit error rate ( BER ), when this has low values ( around 10  " 6 ).
3. We use "'RxQual SUB "'when we have "'DTX DL "'activated because "'RxQual FULL "'values will not be reliable, because they will use Bit error rate ( BER ) measurements when nothing has been sent, what leads to a very high BER and a poor RxQual.
4. Software developers typically want to analyze the response time and sensitivity to packet loss of client-server applications, and emulate specific network access ( wifi / 3G / 4G / transatlantic communication etc . ) with different round-trip-time, throughput, bit error rate, network drop outs and application dropouts.
5. The company was founded by Tom and Jim Waschura, identical twins who formerly worked for Bit Error Rate tester ( BERT ) that generated a pseudo-random series of bits to record and later to be played-back into the BERT device that verified that the bits had been reproduced correctly.
6. In coding theory and related engineering problems, "'coding gain "'is the measure in the difference between the signal-to-noise ratio ( SNR ) levels between the uncoded system and coded system required to reach the same bit error rate ( BER ) levels when used with the error correcting code ( ECC ).
7. In communication systems with very low uncorrected bit error rates, such as modern fiber optic transmission systems, or systems with higher low-level error rates that are corrected using large amounts of forward error correction, errored seconds are often a better measure of the effective user-visible error rate than the raw bit error rate.
8. In communication systems with very low uncorrected bit error rates, such as modern fiber optic transmission systems, or systems with higher low-level error rates that are corrected using large amounts of forward error correction, errored seconds are often a better measure of the effective user-visible error rate than the raw bit error rate.
9. Sample interpolation rate is one every 10 hours at Bit Error Rate ( BER ) = 10 ^ {-4 } and 1000 samples per minute at BER = 10 ^ {-3 } Undetectable error samples ( clicks ) : less than one every 750 hours at BER = 10 ^ {-3 } and negligible at BER = 10 ^ {-4 }.
10. In non-CDMA 2G digital systems the criteria for requesting hard handover may be based on estimates of the received signal power, bit error rate ( BER ) and block error / erasure rate ( BLER ), received quality of speech ( RxQual ), distance between the phone and the BTS ( estimated from the radio signal propagation delay ) and others.